The Hamar S-650 Wireless 5-axis Laser ShaftAlignment system is an industry leading tool for all precision shaft alignment and coupling alignment requirements.
Truly Simple, Fast and Easy to Use
Highly Accurate Alignment Results
Totally Wireless Radio Interface
Auto Dynamic Rotation Sensing
Coupled, Uncoupled, Vertical and Horizontal modes are standard
Customizable Reports direct to email or printers
Robust, sealed design
This user friendly laser aligment system has sub-micron accuracy, is pre-aligned and has a large measurement range for fast roughing-in. There are no annoying cables and with a fast setup and very easy to use graphical software the system will clearly and quickly indicate alignment errors and shimming correction values on its live display, without any additional steps required.
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember.
Uncoupled shaft alignment is also made very easy by the dynamic rotation sensing feature, that allows data to be collected fully automatically as the target is swept past the laser.
As well as delivering an industry leading accuracy level, the easy 5 step checklist software very clearly guides the operator through all typical shaft alignment applications.
An advanced wireless communications link means that target data is sent back to the display CPU of the alignment system in real time without any annoying cables attached to the laser or target.
No other laser shaft alignment system offers better accuracy, being less than 1 micron vertically and 0.2 microns horizontally, and with angular accuracy of less than 10 micro radians. Accurate alignment results are able to be obtained in cramped conditions using as little as 60 degrees of shaft rotation.
With many practical features supplied as standard, including quickset brackets, an adjustable laser beam and the radio communications link, shaft alignment set up time is less than 5 minutes.
Direct radio connection between the target and any laptop computer provides the largest colour graphics display in the industry.
The 5-axis target direcly reads both horizontal and vertical centre and angle simultaneously, as well as precisely measuring rotation angle. Large live graphics in 4 axes instantly and directly show changes in shaft alignment and update shimming corrections as moves are being made.
A dedicated mode specifically provides vertical pump capability, with 4 axes graphics.
The largest measurement cell on the market allows compensation up to 25mm to be easily accommodated.
Rough alignment of new installations is able to be done quickly and easily because the laser and target are pre-aligned to the brackets, providing substantial time savings over the whole job.
A large laser range of up to 9 metres between laser and target allows long shafts to be easily measured and aligned.
The Hamar laser shaft alignment system is a powerful but affordably priced tool, with all systems including, as standard, a complete package of laser, 5-axis target, wireless links, solid protective case and bracket set suitable for up to 12" shafts.
The system comes complete with extensive features including automatic and manual green-light tolerance bands, adjustable averaging and thermal growth compensation.
Optional accessories are available for specific applications, such as large shafts and non-rotating shafts as well as time based sampling for alignment monitoring.
For further information or to arrange an on-site demo, call us on 1300 699 176. or mailto:info@istecnik.com.au
The dynamic rotation sensor of the S-650 laser shaft alignment system provides a new level of simplicity in shaft alignment tools, allowing complete coupled shaft data to be automatically generated with remarkable ease by a single sweep of the shaft through any angle! No buttons to press and no confusing clock positions to remember. 